|
Harun Yanar, Muhammet Demirtaş, Hüseyin Ayar, Gencaga Purcek, Effect of Fiber Content on the Friction and Wear Performance of Non-asbestos Composites Used in Brake Pads, IOP Conf. Series: Materials Science and Engineering 724 (2020) 012018 doi:10.1088/1757-899X/724/1/012018
Abstract: Effect of steel fiber addition on the friction and wear characteristics and mechanical properties of non-asbestos composites brake pad material was investigated. For this purpose, the content of steel fiber was added in the range of 0 - 20 wt.% with changing the rock fiber of the matrix structure. The matrix has also phenolic binder resin, cashew nut shell liquid, aramid pulp, magnetite, rubber and graphite. Friction behavior of the samples prepared from the mixture were tested using a pin-on-disk type test configuration according to the NF F 11-292 French standard. It was observed that coefficient of friction (CoF) of composite samples increased with increasing steel fiber content. After 5wt.% steel fiber addition, the CoF of composite did not significantly change. Although the steel fiber addition caused a significant increase in the CoF of the composite, no significant change can be observed in the specific wear rate with steel fiber addition up to 15wt.%, above which it increased significantly. On the other hand, steel fiber addition to the composite matrix deteriorated the mechanical properties, but improved the fade resistance of the sample.
Devamı |
