Yayınlar
Makalenizi Paylaşın
Kişisel bilgileriniz KVKK kapsamında kimseyle paylaşılmayacaktır.
Friction and wear enhancement of magnetron sputtered bilayer Cr–N/TiB2 thin-film coatings
In this study, AISI52100 steel surfaces were coated with bilayer Cr–N/TiB2 thin films in total thickness of 65 and 120 nm by magnetron sputtering. The …
Yayına Git
Tribological Behavior of TiAlN, AlTiN, and AlCrN Coatings at Boundary Lubricating Condition
In this study, ~ 3.5 µm thick multilayer titanium alumina nitride (TiAlN), alumina titanium nitride (AlTiN), and alumina chromium nitride (AlCrN) coatings were deposited on …
Yayına Git
Wear and corrosion resistance enhancement of chromium surfaces through graphene oxide coating
Corrosion and wear protection of metals are crucial for all industrial applications. Graphene oxide (GO) is a chemically modified form of graphene and is highly …
Yayına Git
Effects of ceramic-based CrN, TiN, and AlCrN interlayers on wear and friction behaviors of AlTiSiN+TiSiN PVD coatings
In this study, the wear and friction behavior of cathodic arc physical vapor deposited AlTiSiN+TiSiN coatings on H13 tool steels were investigated by using CrN, …
Yayına Git
Wear and friction behavior of CrTiN/TiCN and CrTiN/CrCN multilayer composite coatings
Multi-layer CrTiN/CrCN and CrTiN/TiCN coatings were deposited on 2379 and SLD steels by cathodic arc physical vapor deposition (arc-PVD) in different thicknesses. Coatings are mechanically, …
Yayına Git
Wear performance under dry and lubricated conditions of duplex treatment TiN/TiCrN coatings deposited with different numbers of CrN interlayers on steel substrates
Cold work steels are used in harsh conditions including high load, wear, corrosion, and mechanical stresses that can easily lead to degradation and wear of …
Yayına Git
Unveiling the influence of CeO2 rare-earth oxide content on in-situ phase formation and properties of aluminium matrix composites
In this study, the hot pressing technique was used to produce Al-CeO2 composites. Furthermore, the effects of CeO2 content on in-situ phase formation and the …
Yayına Git
We are pleased to share a scientific paper on “Tribological Behavior of TiAlN, AlTiN, and AlCrN Coatings at Boundary Lubricating Condition” performed by UTS TRIBOLOG".
Bu çalışmada, H13 çeliği üzerinde CAPVD yöntemiyle çok katmanlı TiAlN, AlTiN ve AlCrN kaplamalar üretildi ve sınır yağlama koşullarında bunların tribolojik performansları karşılaştırıldı. Bu çalışmada …
Yayına Git
We are pleased to share a scientific paper on “friction behavior of low-steel composite brake pad material for railway applications” performed by UTS TRIBOLOG".
Bu çalışmada, farklı miktarlarda hekzagonal bor nitrür (h-BN) içeren düşük çelik içerikli kompozit fren balatası malzemeleri, demiryolu araçlarına yönelik olarak geliştirilmiş ve NF F 11–292 …
Yayına Git
We are pleased to share a new scientific paper on “Two- & Three-Body Wear of Dental Composites” performed by UTS TRIBOLOG".
In this paper, Two-and three-body friction and wear characteristics of three different dental composites (flowable bulkfill, single shade, and conventional composites) were investigated using modular …
Yayına Git
A new scientific paper on “TiN/TiCrN coatings” performed by UTS TRIBOLOG".
In this paper, the TiN/TiCrN coatings with the different number of CrN interlayers were successfully deposited on nitrided and non-nitrided DIN 1.2379 steel, and their …
Yayına Git
A new scientific paper on “electrical arc-induced wear” performed by UTS TRIBOLOG".
In this paper, it was shown that deformation-induced ultrafine grain refinement significantly improves the wear resistance of CuNi2SiCr alloys, especially under current-carrying conditions (0–25 A), …
Yayına Git